THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. 
EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES 
PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 
FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE 
PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL 
NECESSARY SERVICING, REPAIR OR CORRECTION.

 Original Author: Jeffrey Nygaard
 Company: Northern Lights Electronic Design, LLC
 Date: March 4th, 2019
 Contact: JNygaard@NLEDshop.com
 Copyright© 2019 by Northern Lights Electronic Design, LLC. All Rights Reserved
 
 Want a customized device that runs NLED Auora? We are avaialable for custom design work please contact!

;=============          www.NLEDShop.com/nledaurora           ============
;=============     www.NorthernLightsElectronicDesign.com       ============
 
NOTE: Version 1 and Version 2 are significantly different, the firmware version and software version must match(2&2, 1&1)
 
NLED 4 Channel DMX Wash Controller: https://www.nledshop.com/4chandmx/
 
	 Changes v1g to v2a: 3/3/2019
			- Updated Device Connect command to version 2 compatibility - numerous and large changes
			- Changed configuration upload confirm to v.2 'zAck' usage
			- Added command authentication
			- Added Sequence up and down command, toggle pause, speed increase, speed decrease, speed override
			- Added limit checks to all EEPROMs, no matter what the menu can be accessed, hopefully protects against bricking
			- Standardized configuration upload
			- Changed how communication is selected by the user
 
	 Changes v1f to v1g:
		- Added  configuration initialization limits, in case of corrupted device configurations
		- Fixed a reset issue when changing sequnces
	 
NLED Four Channel Mini: https://www.nledshop.com/fourchan/

	Changes v1d to v2a: 3/3/2019
		- Updated Device Connect command to version 2 compatibility - numerous and large changes
		- Changed configuration upload confirm to v.2 'zAck' usage
		- Added command authentication
		- Added Sequence up and down command, toggle pause, speed increase, speed decrease, speed override
		- Added limit checks to all EEPROMs, no matter what the menu can be accessed, hopefully protects against bricking
		- Standardized configuration upload
		- Changed how communication is selected by the user
		
	Changes v1b to v1d:
		- Added  configuration initialization limits, in case of corrupted device configurations

	Changes v1b to v1c:
		- fixed strobe function

	Changes v1a to v1b:
		- never actually released, but only changed the 257 adr fix